Knomentous Customer Login Cable Tracking System
Menu

Webinars

Novinium’s webinar series addresses key issues including neutral corrosion, regulatory requirements, asset management planning, and manhole event prevention.

Previous

IEEE® P1816™ Utility Implementation with Michael Smalley

November 2, 2012 1:00 pm

IEEE P1816 is designed to address craft errors by providing utilities with proven craft techniques. In this webinar, Mike Smalley – Vice Chair of the P1816 Task Group – goes over the various techniques included in P1816. By implementing P1816’s best practices, you, too, can reduce craft errors and improve reliability.

Learn More >

Separable Connectors: Common Failures and How to Avoid Them with Glenn Luzzi

October 12, 2012 1:00 pm

In this webinar, “Separable Connectors: Common Failures and How to Avoid Them with Glenn Luzzi”, learn about the 3 existing connector systems currently defined in IEEE 386, the disconnectable joint systems which are expected to be covered in the next revision of the IEEE standard, and review failure mechanisms associated with each of the above 4 types of separable connector systems. Most importantly, learn ways to improve product and system reliability!

Learn More >

Neutral Corrosion: Causes, Identification & Mitigation with Vern Buchholtz

September 21, 2012 1:00 pm

For the first time ever, comprehensive neutral corrosion data for much of North America will be shared. Participants will leave the webinar with a clear understanding of the magnitude of the neutral corrosion issue. If you or your colleagues were unable to attend the live event, register and watch a recording of the event at your leisure. Finally, neutral corrosion will be demystified. Craftsman, engineers, asset managers, and anybody responsible for reliability of underground distribution cable should attend.

Learn More >

Cable Reliability with Harry Orton

July 11, 2012 1:00 pm

In this second webinar in the Masters of Reliability™ series, guest speaker Harry Orton will discuss the steps needed to ensure underground cable reliability – starting with the cable specification, the design and materials selection, manufacturing plant audits, thorough testing to international standards, careful installation and – finally – life-time operation within the rating of the cable. Following Harry’s recommendations can help you, too, achieve long, reliable in-service life of underground power cables.

Learn More >